dovecot2.0*listen错误 postfix dovecot 配置

错误:服务(POP3登陆):听(:110)失败:
错误:插座()不按协议支持的地址族失败
:错误:不按协议支持的地址族(POP3登录):听(:,995)失败:
错误:插座()不按协议支持的地址族失败:
协议错误:地址族不支持服务(IMAP登陆):听(:143)失败
:错误不按协议支持的地址族:插座()失败:
错误:不按协议支持的地址族(IMAP登陆):听(:993)失败:不按协议
dovecot2.0*listen错误 postfix dovecot 配置
支持致命的地址家庭:无法启动监听器
Error:service(pop3-login): listen(::, 110) failed: Address family notsupported by protocol
Error: socket() failed: Address family not supported byprotocol
Error: service(pop3-login): listen(::, 995) failed: Address familynot supported by protocol
Error: socket() failed: Address family not supported byprotocol
Error: service(imap-login): listen(::, 143) failed: Address familynot supported by protocol
Error: socket() failed: Address family not supported byprotocol
Error: service(imap-login): listen(::, 993) failed: Address familynot supported by protocol
Fatal: Failed to start listeners


-------------------------------------------------------------------------------------
itmeans that Dovecot is trying to bind to an IPv6 interface, but yoursystem doesn't support IPv6. The solution is to tell Dovecot toonly listen on an IPv4 interface. You can do this by adding thefollowing to the very top of your /etc/dovecot.conffile

listen = *

The internal default is

listen = *, ::

where the :: is the IPv6 part, hence you don't want to use that inthis case.

这意味着,Dovecot是试图绑定到IPv6接口,但您的系统不支持IPv6。解决的办法是告诉达夫科特只监听IPv4接口。你可以到你的/etc / dovecot.conf文件中加入以下这

听=*

内部默认

听=::

:是IPv6的一部分,因此你不希望在这种情况下,使用。

  

爱华网本文地址 » http://www.aihuau.com/a/25101010/42583.html

更多阅读

电脑出现DNS错误无法上网怎么办 精 dns配置错误不能上网

电脑出现DNS错误无法上网怎么办 精——简介电脑正在上着网的时候突然在打开的页面上出现了DNS错误,无法上网了,这时候你是否感觉特别的郁闷,对于DNS错误应该如何处理呢?电脑出现DNS错误无法上网怎么办 精——方法/步骤电脑出现DNS错误

Tomcat安装及配置教程 tomcat怎么下载安装

Tomcat安装及配置教程——简介用来进行web开发的工具有很多,Tomcat是其中一个开源的且免费的java Web服务器,是Apache软件基金会的项目。电脑上安装配置Tomcat的方法和java有些相同,不过首先需要配置好java的环境才行。Tomcat安装及配

FastCGI Error编号14001错误,处理办法 fastcgi error 258

在家里,不得言在使用VMware虚拟机进行2003下的FastCGI和php 5.3.6配置测试时,因有好多补丁没有打,甚至.net 2.0都没有安装,因此出现了一系列的错误,本文就是其错误之一:The FastCGI Handler was unable to process the request.错误显示为

中兴M6000的NAT配置 中兴m6000常用命令

中兴M6000的NAT配置1、建立私网地址的vbui接口interface vbui101 description nat-pppoe-pool ip address 100.64.0.1 255.255.0.02、建立acl源地址为nat私网地址ipv4-access-list nat rule 1 permit 100.64.0.0 0.0.255.2553、配

声明:《dovecot2.0*listen错误 postfix dovecot 配置》为网友汝情三幸分享!如侵犯到您的合法权益请联系我们删除